Sign In | Join Free | My ccnmag.com
China Hangzhou  Linuo Machinery  Co., Ltd logo
Hangzhou Linuo Machinery Co., Ltd
Active Member

11 Years

Home > Adsorption Compressed Air... >

Heatless Regenerative Desiccant Air Dryer

Hangzhou Linuo Machinery Co., Ltd

Heatless Regenerative Desiccant Air Dryer

Packaging Details : plywood case

Payment Terms : D/P, L/C, T/T

MOQ : 1 Set

Supply Ability : 500 Set / Month

Delivery Time : within 30 days after the order confirmed

Place of Origin : zhejiang, china

Category : Plastic Drying Machinery

Contact Now

Heatless Regenerative air Dryer
Brief introduction:

Heatless desiccant air dryer adopts the way of using adsorbent media to adsorb the moisture and the contaminant from compressed air, the adsorbent media can be generated or purged from the moisture it collected and use again and again.

It adopts the outstanding design of two towers which simultaneous allows one is drying and the other is regenerating, with the 10 minutes working period by SIMENS control valve, this kind of air dryer is specially fit for the critical compressed air applications or for those in extremely cold ambient conditions where the moisture remaining in the air would freeze inside the compressed air system piping.

Advantage:

1. The excellent design of the two tower

 It can ensure activated aluminium oxide contact time enough to dry the saturated wet air entering in dryer to the needed dew point, 30% extra desiccative can compensate the desiccative consumption and ensure the life time, then guarantee the best performance

2. Adopts the large scale diffuser

    To ensure the air stream well proportioned to get through the desiccative level

3. Reliable controlling system

   3.1 Within 10 minutes period dry the compressed air to very low dew point of -40°C or within 4 minutes period dry  to -70°C,and can be conditioned at site

   3.2 Micro CPU control way , and the PLC control is optional

4. System Pressure drop is lower than 0.02MPa

5. Easily operation & easily maintenance

     Power on-off switch, the period mode setting, power on light, regenerative on light

Technical specification:
Rated Inlet Temperature: ≤38°C
Maximum inlet temperature: ≤49°C
inlet oil content: ≤0.1ppm
Outlet Pressure Dew Point: -40°C (70 °C below zero is optional)    
Adsorbent: Activated alumina or molecular sieve      
 Rated Working Pressure:0.6~1.0MPa(1.0MPa or above is optional)
Pressure loss: 0.02MPa
Control Model: CPU (standard configuration), PLC is optional    
Working Mode: Automatic switching between tower A and tower B, continuous working         
Regeneration Way: Heatless regenerative
Regeneration Air Consumption: 14%
Cycle Period: 4~10min, adjustable
Power Supply: 220V/50HZ
ModelProcessing capacity
Nm3/min
Length
MM
Width
MM
High
MM
onnection diameterWeight
KG
LN-101.36405501980DN25130
LN-151.76605701980DN25150
LN-202.06605702080DN25250
LN-303.07807201950DN40260
LN-505.07807202100DN40260
LN-8088608102100DN40360
LN-100108808502000DN50460
LN-130138808502100DN50600
LN-1701710409302150DN651100
LN-2102112709702150DN651250
LN-27027131011002250DN651500
LN-32032131011002550DN651700
LN-40040140012002600DN802000
LN-45045145012002400DN1002200
LN-50050145012002500DN1002300
LN-60060165015002550DN1252400
LN-70070165015002850DN1252800
LN-85085190016002680DN1253900
LN-1100110230021602670DN1504500
LN-1500150260023403100DN1505500
LN-2000200300024003100DN2007500
LN-2500250300023003400DN2008800
Parameters above are for your reference. Large scale please contact us for specific information.


China Heatless Regenerative Desiccant Air Dryer wholesale

Heatless Regenerative Desiccant Air Dryer Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Hangzhou Linuo Machinery Co., Ltd
*Subject:
*Message:
Characters Remaining: (0/3000)